Here is how to fix/replace a leaking Moen shower faucet cartridge: 1. If you are not sure which one to buy, look for the faucet series number on the escutcheon (cover plate) or underneath the faucet handle and order a matching cartridge. These are:Īll Moen faucet cartridges are not interchangeable. How to Fix a Leaking Moen Shower Faucetīefore getting down to business, you will need to gather a few tools. Replacing the cartridge will fix this problem at once. If you have a bathtub-shower-combo and you notice that your shower head is dripping water or that there is water dripping from your bathtub spout, the shower faucet is often the culprit. Moen faucets have a lifetime warranty so all you have to do is to email/call them for a replacement. While replacing the 2 O-rings/washers is possible, the best way to fix a leaking Moen shower faucet is to replace the cartridge. The 2 washers which shut off the cold and hot water flow are in most cases worn out, allowing water to drip even when the faucet is turned off. Image by MoenĪ leaking Moen shower faucet is usually caused by a faulty cartridge. Fixing a leaking Moen shower faucet is an easy task that will take you not more than 30 minutes and save you in excess of $80 dollars in plumbing fees depending on your area. The good news is that you don’t need to call a plumber to fix one for you. You will from time to time deal with a leaking Moen shower/bathtub faucet. Although they last longer than most of the other faucets, the definitely don’t last forever. Turn on the shut valve of the main water supply and turn on the bathtub water to ensure the leaking bathtub spout is repaired.Moen Shower faucets are some of the best in the industry. Step 10: Replace the handle by reversing the steps you did when you removed it. You can use caulk in between the collar and the wall. Step 9: Use the old stem tube to thread the new stem and tighten it just enough onto the wall. Attach the new stem into the wall by threading it as carefully as you can since you do not want to turn it too tight and damage the thread. Step 8: Get the stem replacement and insert the new washer onto the new stem. This way, you ensure that you will get the right kit for your bathtub since they come in various types and sizes. Step 7: Take the old stem and drive to the nearest local hardware or a plumbing supplies store. However, since new stems are not costly, you can replace them altogether. They are usually the first ones to get damaged and might just need to be replaced. Step 5: Once the stem is removed, get the cloth and cover the hole to ensure water will not leak. You can also check the seat on the faucet to see what shape it is using a flash light. In case the hex of the stem is a bit recessed in the wall, you need to use a stem wrench to remove it. When it is loosened, it can be removed easily with your hand. Step 4: After the collar is removed, you need to remove the cartridge or the stem by turning the nut counter-clockwise using the pliers. Remove the handle and the collar as well. Remember to hold the handle firmly as you remove the screw. If you have a handle that is one of the older ones, with a bulb design, remove pry open the cover and open the cartridge and remove the screw. If there is a collar that grips the wall, you need to remove this as well. Step 3: Unscrew the handle by turning the screw counter-clockwise to loosen it and remove the handle. With the use of a screwdriver with a flat head, you can pop it out to expose the screw. You might need to remove the cap on the faucet handle. Step 2: Look for the screw on the handle of the faucet. Turn on the water in the bathtub to remove the remaining water in the pipe. Step 1: Locate the main water valve and shut it off.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |